Honeywell BC-200 - Page 22

Panel Operation
BC-200 Manual – P/N DOC-01-013 22
System points will be displayed and can be referred to as follows:
Description
Syntax
Comments
On Board AZF’s
2 AZF’s on termination Board
AZF #1 0.1.Z1 Ring 0 Module 1, zone 1
AZF #2 0.1.Z2 Ring 0 Module 1, zone 2
On Board Relays
8
Relays
on termination Board
Relay 1 to 8 on FIM 0.4.O1 to 0.4.O8 Ring 0 Module 4, output 1
Ring 0 Module 4, output 8
Distributed Field Modules
Up to
100
modules
AZF 1.1.Z1 8 AZF points per AZM8module
Din 1.1.I1 3 Din Per Fan Control Module
Dout 1.1.O1 4 Dout Per AZM-8
3 Dout Per Fan Control Module
Description
Syntax
Comments
Annunciator
Up to 50 Annunciators
Inputs 1.101.I1 16 Din per 16AT, 24 Din Per SCS-8
Outputs 1.101.O1 32 Dout Per 16AT, 24 Dout Per SCS-8, 32
Dout Per ACM32A
Analog Addressable Devices
Up to
4
Loops
Detectors L1D1 99 Detectors Per Loop
Modules L1M1 99 Modules Per Loop
Virtual Points
VPn
n can range up to 1000
Network Points
NPn
n can range up to 1000
Expansion Relays
XRn
n can range up to 64
System Parameters
Common Alarm CA
Common Fault CF
Common Isolate CI
Battery Fault BF
Charger Fault CL
Mains On MO
Ext. Bell Isolated BI
Warning System Isolated WI