Panel Operation
BC-200 Manual – P/N DOC-01-013 61
7.3.5.1.3 SERVICE MENU – CONFIG – DIN
Once you have selected the Digital Input you wish to change you will be in the “Modify Point” screen as follows:
SELECTED POINT: 1.4.i1
NAME. >
MODIFY POINT
20 JULY 2002 14:44:37
BACKSP
PLEASE ENTER THE INFORMATION BELOW:
Use arrows to move
around. INS,DEL to edit
lines. ENTER accept
line and/or Skip to
next item ESC to leave
this screen
Overwrite mode
A = 0
F = 0
I = 0
N = 1
ENTER
DAY MODE
ESC
Use the external keyboard to enter a descriptor (up to
28 characters) for the output and press the
ENTER button.
You will then be prompted to accept. Press the YES
button to accept or the NO button to redo.
A descriptor is the only configurable option for a digital
input.
ESC will take you back to the previous screen.
To Next Page
Loading...
