4-54
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
DIGITAL
MSG TYPE
DEFINITION:
Defines when the digital message is printed.
HOW TO MODIFY IT:
Select a new MSG TYPE.
POSSIBLE CHOICES:
NONE: The standard message (date, time, alarm type ...), and the operator
message are not printed.
STD MESSAGE: The standard message (date, time, alarm type...) is printed
at alarm activation, at alarm release, but operator message is not printed.
MESSAGE ON: Standard operator message is printed when the digital
contact is closed.
MESSAGE OFF: Standard operator message is printed when the digital
contact is opened.
MSG ON/OFF: Standard operator message is printed when the digital contact
is closed and opened.
SEE ALSO:
MESSAGE in MESSAGES sub-matrix
WARNING:
The selection of NONE does not prevent the printing of functional messages
such as, messages of range, speed and group change, these are configurable
by the CHART DOC sub-matrix FUNCT MSG parameters.
In case of many MESSAGES the printing order can be changed.
SUB-MATRIX PARAMETER CLASSIFICATION
DIGITAL
TRACE
DEFINITION:
Enable/disable the digital trace.
POSSIBLE CHOICES:
ENABLE
DISABLE
To Next Page
Loading...
