8-2
8. SERVICE
8.1 OPERATOR INTERFACE
8.1.1
ACCESS TO SERVICE
Access to READ/WRITE Configuration, COPY, PRINT CONFiguration or SERVICE from Operation mode is
obtained by pressing the SETUP key.
8.1.2
PASSWORDS
To protect the recorder against unauthorized access, the operator has to enter a password. There are two
possible levels of access :
• Password #1 allows reduced access to service. If password #1 is used, you are only able to
adjust the 0 % and 100 % chart markings.
• Password #2 allows full access to service.
NOTE: Use of the
keys allows you to select SERVICE.
To Next Page
Loading...
