4-62
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
PRINTER
SPEED 1
DEFINITION:
Value of speed 1. Whem print mode is TREND.
HOW TO MODIFY IT:
Enter a numeric value based on speed unit selected.
POSSIBLE CHOICES:
With mm/h unit:
[1 ... 5000]
or
With inch/h unit:
[0.04 ... 196.86]
Refer to SPEED UNIT to know the speed unit in use.
NOTICE
The following elements may affect the printing performances:
- A fast chart speed.
- A large span printing
- Color arrangements printing
(See chart below for typical worst case)
* The return to the configured speed can be done by executing a PRT INHIBIT or by switching the recorder
off and on or by changing the configuration mode, see page 4-3.
To Next Page
Loading...
