4-67
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
PRINTER
CHART LG
DEFINITION:
Specifies the chart length of the chart roll or fanfold that actuates the event
alarm.
This is used with the recorder EVENTS to signal when the chart paper has
reached the pre-configured chart length.
HOW TO MODIFY IT:
Enter length value chart.
POSSIBLE CHOICES:
[0...35000] mm
[0...1378] inch
Refer to SPEED UNIT in this matrix to know the unit in use. (See page
4-61)
SEE ALSO:
EVENT TYPE in EVENTS sub-matrix. (See page 4-85)
NOTICE
The maximum length value of chart paper is 35 m. (115 ft.)
To Next Page
Loading...
