Honeywell DPR180 - Page 132

4-78
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
MMI
HOLD KEY

DEFINITION:
To enable the Hold key so the operator can modify the display scanning from
the keyboard and hold the upper display on a desired channel.
HOW TO MODIFY IT:
Choose a new selection.
POSSIBLE CHOICES:
ENABLE
DISABLE
NOTE:
The possible actions are:
- Scan
- Hold: Stops the scanning of the upper display on the current channel.
Use the keys
 or  to change the channel number shown on the upper
display.
SEE ALSO:
SECTION 3.5 " OPERATOR INITIATED ACTIONS"
SUB-MATRIX PARAMETER CLASSIFICATION
MMI
DISPLAY KEY

DEFINITION:
To enable the display key so the operator can modify the display from the
keyboard.
HOW TO MODIFY IT:
Choose a new selection.
POSSIBLE CHOICES:
ENABLE
DISABLE
NOTE:
This key gives access to the different configuration. For each display the
possible indications are the same as the configuration of DISPLAY HI,
DISPLAY LO Parameters.
SEE ALSO:
SECTION 3.5 " OPERATOR INITIATED ACTIONS"