4-81
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
MMI
DISPLAY LO
DEFINITION:
Type of information displayed on the lower line of the display in the run mode
at power on.
HOW TO MODIFY IT:
Choose a new selection.
POSSIBLE CHOICES:
Displayed messages:
ANALOG INPUTS
2 PVS TRACE
COMM RESULTS
ALARM STATUS
SPEED IN USE
DATE & TIME
Explanation:
: Display the analog inputs configured
: 2 consecutive channels traces are
displayed on the same display line
: Display communication channels
: Display alarm states
: Display of chart speed in use
: Display of date and time
NOTE:
If the selection is the same choice for the 2 displays, displays 1 and 2 are
consecutive.
SEE ALSO:
SECTION 3.5 " OPERATOR INITIATED ACTIONS"
SUB-MATRIX PARAMETER CLASSIFICATION
MMI
BRIGHT
DEFINITION:
To modify the display brightness during operation.
HOW TO MODIFY IT:
Choose a new selection. Press the key until the display indicates the right
value. Then press ENTER.
POSSIBLE CHOICES:
OFF (0%)
>> (20%)
MEDIUM (40%)
>> (60%)
>> (80%)
HIGH (100%)
To Next Page
Loading...
