5. PC CONFIGURATION
5-26
Error message Error Classification Corrective action
There are unconformities in: line: Unconformity Unconformities between the hardware
options and the configuration being
downloaded.
Unable to create firmware file Error during firmware extraction Close the application and retry.
Unable to remove configuration Error during remove
configuration operation
Provide a non-corrupted database that
contains the configurations and retry the
operation.
Unexpected Reset of Device. The
Upgrade Firmware will be aborted
Firmware upgrade error The device has reset during the
download. Retry the operation
Upgrade failed Firmware upgrade error Upgrade operation was not completed.
The reason for error is displayed prior to
“Upgrade failed” error message.
Verify that the disk is not protected
and retry the action.
Error during an export operation Ensure that the tab on the floppy disk is
set to a position that allows data to be
written onto the disk and retry the
operation.
Warning: Configuration corrupted! Corruption of configuration Delete the selected configuration file and
recreate the configuration file.
To Next Page
Loading...
Need help?
General
