3-11
3. OPERATION
Press ENTER and use or to choose the display type.
3.5.3 RESET display
3.5.4 Alarm acknowledgment
Pressing ACK key is only allowed for alarms you have configured in acknowledgment mode.
This acknowledgment is only available
• f the lower display shows alternately:
and the display type,
- if the ACK key is active.
(See ACK KEY parameter in the MMI sub-matrix)
SNAP SHOT MATH
START ARCHIVE
or
STOP ARCHIVE
REMOVE PCMCIA
Only when PCMCIA option is installed.
RESET MATH #
RESET ALL MATHS
RESET OCCURRENCE
RESET ALL OCCUR
RESET PCMCIA
Only when PCMCIA option is installed.
REQUEST ACK NOW
Only when MATH OPTION is configured.
To Next Page
Loading...
