4-3
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
NAME OF THE
FUNCTION
NAME OF THE
PARAMETER
IMPORTANCE OF THE PARAMETER
CAN BE CHANGED IN RUN MODE
STOP OF ACQUISITIONS
WITH PASSWORD 1 OR 2
ONLY WITH PASSWORD 2
DEFINITION:
EXPLAIN THE ROLE OF THE PARAMETER
HOW TO MODIFY IT:
BY SELECTING OR ENTERING A NEW VALUE I.E. USING
THE
KEYS
POSSIBLE VALUES:
LIST OF POSSIBLE VALUES OR LIMITS
SEE ALSO:
EXAMPLE:
NOTE:
NOTICE
The configuration of parameters with the classification ““ stops the
Acquisition as well as the operation of alarm supervision.
Leaving the configuration mode resets the memory buffer and the alarm status
is defined again, and the chart speed changes back to the
Configured value. Occurrence value is reset.
To Next Page
Loading...
