4-9
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
ANALOG INPUT
RANGE
DEFINITION:
DISPLAY ACTUATION RANGE
For directly connected temperature sensors and non-linear temperature
transmitters, the actuation selection defines the linearization routine used to
produce a linear chart scale. For linear transmitters, the selection simply
defines the transmitter's range/span.
The choice of actuation offered by the recorder during configuration will
depend upon sensor selected. The ranges allowed will depend on whether
you have selected Thermocouple, Linear or Non Linear or RTD.
HOW TO MODIFY IT:
Select a new actuation using the or arrows and press ENTER
POSSIBLE VALUES:
Depends on the type of sensor connected. Possible selections are listed
below.
To Next Page
Loading...
