4-17
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
ANALOG INPUT
DIFF WITH
DEFINITION:
Second channel used when STD MATH = CHANNEL DIFF
HOW TO MODIFY IT:
Select a new value.
POSSIBLE CHOICES:
ANALOG # i (i = 1 ... 24)
NONE
NOTE:
The software will only allow selection of pre-configured input.
For the difference between 2 channels, it is recommended to take first the
highest channel reference and subtract from the other channel.
Example:
You want to make a difference between channels 7 and 12: make ch12 minus
ch7.
To Next Page
Loading...
