4-19
4. CONFIGURATION
SUB-MATRIX PARAMETER CLASSIFICATION
ANALOG INPUT
LOW ADJUST
HIGH ADJUST
DEFINITION:
Zero adjust and span adjust are values used to calibrate a temperature loop.
Otherwise choose 0 Value = Factory Calibration
Adjustments are made directly in Engineering unit to the input range.
(ex.: 5 = 5
o
C)
HOW TO MODIFY IT:
Enter a numeric value.
POSSIBLE CHOICES:
Up to 3 digits including negative sign and decimal point.
[-99 ... +99]
EXAMPLE:
LOW ADJUST will be added to the 0% of the considered range.
HIGH ADJUST will be added to the 100% of the considered range, so the
calibration is changed.
To Next Page
Loading...
