Safety SmartRadar FlexLine
Installation Guide Part No.: 4417.760_Rev06
8
2.7.2 Tools
2.7.3 Working Environment
2.7.3.1 Hazardous Zone
2.7.3.2 Safe Zone
WARNING!
Treat the flange surface of the cover and the housing
with care. Keep the flange surface free of dirt.
The O-ring must be present and undamaged.
WARNING!
Use non-sparking tools and explosion-proof testers. Use
suitable explosion-proof tools (e.g. testing devices)!
WARNING!
POTENTIAL ELECTROSTATIC CHARGING HAZARD
• Avoid generation of static electricity.
• In case a OneWireless SmartRadar FlexLine is
installed, do NOT wipe the surface of the antenna with
dry cloth, and do NOT clean its surface with a solvent.
If electrostatically charged, discharge of the antenna
surface to a person or a tool could ignite a surrounding
hazardous atmosphere.
WARNING!
Make sure that no explosive gas mixtures build up in the
working area.
To Next Page
Loading...
