Installation SmartRadar FlexLine
Part No.: 4417.760_Rev06 Installation Guide
17
4 INSTALLATION
4.1 Safety
4.1.1 General
WARNING!
Make sure the power to the device is switched OFF,
before you open the cover of the device.
CAUTION!
Do not make any additional holes in the housing. Do not
incorporate rotating machines or other devices, which
create turbulence inside the FlexConn box.
WARNING!
Always clean the FlexConn box flange, when you open
or before you close the housing.
WARNING!
Make sure that no explosive gas mixtures build up in the
working area.
NOTE:
Make sure the wireless FlexLine complies with the local
radio regulations (FCC, ETSI, etc.).
To Next Page
Loading...
Need help?
General
