Installation SmartRadar FlexLine
Installation Guide Part No.: 4417.760_Rev06
18
4.1.2 Hazardous Zone
4.2 Receipt
Open the box
Make sure the following items are in the box:
• The device
• The communication antenna (OneWireless option only)
• Safety instruction
• Declaration of conformity
• Installation guide
Inspect the package upon arrival. Make sure the items are
not damaged. Contact your local representative or Honeywell
Enraf in the event of damage.
WARNING!
POTENTIAL ELECTROSTATIC CHARGING HAZARD
• Avoid generation of static electricity.
• In case a OneWireless SmartRadar FlexLine is
installed, do NOT wipe the surface of the antenna with
dry cloth, and do NOT clean its surface with a solvent.
If electrostatically charged, discharge of the antenna
surface to a person or a tool could ignite a surrounding
hazardous atmosphere.
NOTE:
Do not throw away the packaging. The packaging is
necessary for further transport on site. The packaging is
necessary if the device is returned for service or
warranty.
To Next Page
Loading...
