Installation SmartRadar FlexLine
Installation Guide Part No.: 4417.760_Rev06
22
4.6.2 Mount Communication Antenna (OneWireless option only)
In case of a OneWireless SmartRadar (option), a communication
antenne is delivered. Mount the communication antenna by
screwing it clockwise upon the lightning arrestor (see picture
below).
NOTE:
The lightning arrestor (see figure above) protects the
inside electronics from lightning damage. Although it will
protect against multiple discharges, it can be replaced as
a preventive maintenance action. Preventive
maintenance interval depends on location, position of the
equipment, grounding, and other protection measures
installed.
To Next Page
Loading...
