50 ES-50X Series Manual — P/N LS10129-000FL-E:E 5/23/2022
Programming Users and Passwords
3.4.1 Administrator Role
Password Change-Administrator
The factory set password must be changed to clear the Password Fault from the panel. Pressing the Enter key on home screen will cause the
following screen to be displayed:
Press 2 to login to the panel. The following screen will appear.
Select 1 for Administrators.
Select 1 for Administrator 1.
Enter the default eight-digit password, 00000000. Note that the passwords will not be displayed on LCD annunciators.
The following screen will appear when the password is entered:
Select 1 to modify an account.
Select 1 to modify an Administrator account.
Select 1 to modify the Administrator 1 account.
Press 3 to change the default password. The default password, 00000000, must be changed to clear the Password Fault from the panel.
1=READ STATUS MODE
2=LOGIN
SELECT ACCOUNT
1=ADMINISTRATORS
2=USERS
3=NOT USED
SELECT ADMIN
1=ADMIN 1
2=ADMIN 2
LOGIN FOR ADMIN 1
ENTER PASSWORD
44444444
ADMIN 1 ACCOUNT
1=MODIFY ACCOUNTS
2=VIEW CYBER SEC LOG
3=NOT USED
Enter Password Screen
MODIFY ACCOUNTS
1=ADMINISTRATORS
2=USERS
3=NOT USED
MODIFY ADMIN
1=ADMIN 1 ENABLED
2=ADMIN 2 DISABLED
MODIFY ADMIN 1
1=NOT USED
2=NOT USED
3=PASSWORD
MODIFY ADMIN 1
ENTER PASSWORDS
ADMIN 1: 44444444
NEW: 44444444
To Next Page
Loading...
