Honeywell Galaxy 3-48C Programming Manual

Galaxy 3 Series Programming Manual
D-3
NOTE: M = Mandatory. NM = Non-Mandatory
NOTE: A plus (+) means an event has started. A negative (-) means an event has finished.
Event Log (cont’d)
KEYPAD TEXT DESCRIPTION Trigger Event
+ FINAL Final zone activated (opened) during Setting/Unsetting procedure or when Set. 7. Set Fault NM
– FINAL Final zone de-activated (closed) during Setting/Unsetting procedure or when Set. 7. Set Fault NM
FIRE Fire zone activated (opened). 6. Fire M
FOB REJCT Illegal fob None M
FORCE OMT Force Omit of a zone (Menu Option 14). 8. Omit M
FULL SET Full Set (Menu Option 12) of the system or Group(s). 10. Setting M
FULL TEST Full Test (Menu Option 62) has occurred. None NM
FUSE 14.5 Fault with 14.5V fuse on Power Supply Unit
13. Elec. Status
20. Fault
M
FUSE AUX1 Fault with AUX1 fuse on Power Supply Unit
9. Tamper
13. Elec. Fault
M
FUSE AUX2 Fault with AUX2 fuse on Power Supply Unit
9. Tamper
13. Elec. Status
M
FUSE BELL Fault with Bell Fuse on Power Supply Unit
9. Tamper
13. Elec. Status
M
GRP OMIT + Group Omit has occurred (Group(s) has been omitted). 8. Omit M
GRP OMIT – Group Omit has finished (Group(s) has been un-omitted). 8. Omit M
HIGH RES + Zone changing to High Resistance (1200 to 1300 Ohm) Engineer Log only. 15. Trouble M
HIGH RES – Zone changing from High Resistance to Normal Closed (1300 to 1200 Ohm) Eng. Log only 15. Trouble M
ILL -CODE Illegal code entry 16. Log Zone NM
INST SET+ Instant set odf system or group None NM
INTRUDER Intruder zone activated (opened)
2. Intruder
18. Zone restoral
M
INT DELAY Intruder delay zone activated (opened) None M
INVALD CD Invalid Code entered None NM
JAM DELAY RF jam signal sent to panel None M
KEYSWITCH Keyswitch zone activated (opened) None NM
KSW CANCL Keyswitch Cancels alarm activation (system or Group(s) still Set). 11. Reset/Cancel NM
KSW P/SET Keyswitch part sets the system or group(s) 10. Setting M
KSW RESET Keyswitch resets the system or group(s) None NM
KSW SET Keyswitch full sets the system or group(s) 10. Setting M
KSW UNSET Keyswitch unsets the systems or group)s) 10. Setting M
LATE SET Late Set of the system or group(s) 10. Setting NM
LEGAL CD Legal code entered 16. Log Zone NM
LF RESET Line Fail Reset has occured 20. Fault NM
LID TAMP Lid Tamper alarm 9. Tamper M
Line Fail + Comms Module Line fail has occured or a Line Fail zone activated (opened)
12. Modules/Comms
20. Fault
M
Line Fail - Comms Module Line fail has finished or a Line Fail zone de-activated (closed)
12. Modules/Comms
20. Fault
M
+ Link Link zone activated (opened) 16. Log Zone NM
- Link Link zone de-activated (closed) 16. Log Zone NM

Honeywell Galaxy 3-48C Specifications

General

Brand	Honeywell
Model	Galaxy 3-48C
Category	Security System
Language	English