Honeywell Galaxy Flex V3 Series User Manual

Galaxy Flex Installer Manual Communications [56]
153
Call Back [56.4.3.call back number]
Up to five telephone numbers or IP addresses can be programmed with which Remote
Servicing can instruct the panel to call back. Each telephone number can be programmed to
use PSTN or GSM and each IP address can be programmed to use GPRS or Ethernet.
Remote Control [56.5]

 1 = SIA 4 Control
 
  1 = SIA Contl. IP
  
   1 = Any Address (0 = Disabled, 1 = Enabled)
  
   2 = IP Callback
  
   1 = IP Address 1
  
   2 = IP Address 2
  
   3 = IP Address 3
  
   4 = IP Address 4
  
   5 = IP Address 5
 
  2 = Path
 
  1 = Ethernet (0 = Disabled, 1 = Enabled)
 
  2 = USB (0 = Disabled, 1 = Enabled)

 2 = SMS Control (0 = Disabled, 1 = Enabled)
SIA 4 Control [56.5.1]
T
his section controls the ability for Remote software packages to connect the control panel
for the purposes of remote control when integrating the system into a wider building
management solution.
SIA Control IP [56.5.1.1]
1=Any Address Enable or disable
2=IP Callback Enter up to 5 different IP addresses
SIA 4 Control - Path [56.5.1.2]
Use this option to enable or disable a comms path for integration control purposes. The
comms paths are:
1=Ethernet
2=USB
SMS Control [56.5.2]
Use this option to enable a user to control the panel remotely. See the Galaxy Flex V3 User
Guide for details on how to operate SMS control.

Honeywell Galaxy Flex V3 Series Specifications

General

Brand	Honeywell
Model	Galaxy Flex V3 Series
Category	Security System
Language	English