Codes [42, Quick Menu 7] Galaxy Flex Installer Manual
66
Group options
Single Group A user can be assigned to any single group. In this case type 2 and
above users can access, set and unset the single group only.
Multiple Groups Users can be allocated to more than one group in which case access
and operation is collective; the user cannot choose to operate on a
single or combination of the assigned groups.
Group Choice Users can be allocated more than one group but also have the choice of
which of the allocated groups to view, set or unset. Pressing
while
assigning groups to the user assigns the group choice feature.
Notes:
1. The manager, engineer and remote codes have fixed access to all system groups; this
cannot be reprogrammed.
2. The manager, engineer and remote codes are assigned group choice by default. The
manager can have the group choice feature removed; the engineer and remote codes
have fixed group choice.
3. Users authorized to access Codes [42], can only assign the groups that have been
assigned to their user code. A user who does not have access to group 4, cannot assi
gn
group 4 to another user code.
Card Number [42.1.User code.6]
Card Number contains one of the following numbers:
the serial number from an access control card.
the serial number etched onto the card/fob/tag.
the decrypted code of cards/tags self-learned into the system for use with the KeyProx.
These numbers identify the card/tag/fob to the system and reference it to the user it has been
assigned to.
By default card number is empty.
To enter the required number:
1. Do one of the following:
Enter the unique 10 digit number laser etched onto the card/fob/ tag.
Press A and 1 simultaneously on the KeyProx, and then present the card/fob to the
KeyProx reader within five seconds. The decrypted number in the card is self-
learned by the system and displayed on the KeyProx.
2. Press ent to save the programming and return to the previous m
enu level.
Notes:
1. A card number can be assigned to a user code that does not have a PIN allocated to it.
All other options assigned to this user are valid for the card/fob/tag button programmed.
To Next Page
Loading...
Need help?
General
