Performance Series IP Camera Software Configuration Guide
12
Installing the Browser Plug-In
If you are logging in for the first time, you will be prompted to download and install a browser plug-in.
Follow the on-screen instructions to install the plug-in. When the installation is complete, the web client
automatically refreshes and the Live View interface opens (Figure 3-5).
If this is your first time logging in, you will see the following message:
Please click here to download and install the plug-in.
Figure 3-2 First-time Login Message
1. Click Please click here to download and install the plug-in. A message appears asking if you want
to run or save the file.
Figure 3-3 File Download Security Warning Message for the Plug-in
2. Click Run. A security warning appears.
Figure 3-4 Internet Explorer - Security Warning
3. Click Run to start the installation. The Ready to Install window appears.
4. Click Install.
When the plug-in installation is complete, the installation page closes and the web client displays the
Live View interface (Figure 3-5).
To Next Page
Loading...
Need help?
General