Honeywell H2W2PRV3 - Figure 6-6 no SD Card Warning Configuration Interface; Figure 6-7 SD Card Error Warning Configuration Interface; Figure 6-8 Capacity Warning Configuration Interface

Configuring Events and Alarms
59
Configuring for SD Card Event Settings
SD card events include No SD Card, SD Card Error, and Capacity Warning.
Figure 6-6 No SD Card Warning Configuration Interface
Figure 6-7 SD Card Error Warning Configuration Interface
Figure 6-8 Capacity Warning Configuration Interface
1. Click Enable to trigger an alarm when a microSD card error occurs.
2. Click Email to send an email to a specified receiver if a microSD card error occurs.
Note Emails cannot be sent if the network is offline or if there is an IP conflict.