Configuring Camera Settings
37
SMTP (Email)
Figure 5-16 SMTP Configuration Interface
Table 5-12 SMTP (Email) Configurations
Parameter Function
SMTP Server Enter the server address.
Port The default setting is 25. You can modify this setting as necessary.
Anonymity Supports the anonymity function for the server. You can automatically log
in anonymously. You do not need to enter the user name, password, and
the sender information.
Username Enter the username for the sender’s email
Password Enter the password for the sender’s email
Sender Enter the sender’s email address.
Authentication Enable This is the encryption mode. Select SSL, TLS, or None.
Title Enter the email subject.
Attachment Select the check box to have the system send out a snapshot with the
email.
Mail Receiver Enter the receiver’s email address here. You can enter up to three
addresses.
To Next Page
Loading...
Need help?
General