Need help?Do you have a question about the Honeywell miniMAX and is the answer not in the manual?
General| Current Rating | 0.5A to 10A |
|---|---|
| Operating Temperature | -40°C to +85°C |
| Vibration Resistance | 10-55 Hz, 1.5mm amplitude |
| Voltage Rating | 125VAC, 28VDC |
| Mounting | Panel |
| Termination Style | Solder Lug, Quick Connect |
| Operating Voltage | 125VAC, 28VDC |
| Contact Form | SPDT, DPDT |
| Contact Resistance | 10mΩ max |
| Dielectric Strength | 1000VAC |
| Shock Resistance | 100g |
| Insulation Resistance | 1, 000 MΩ minimum |
Steps for installing the HMXAT200 control computer, power supply, and video subracks.
Guidance on subrack addressing, baud rate, and DIP switch settings for HMX32128 subracks.
Steps for connecting keyboards, subracks, and other peripherals to the HMXAT200 controller.
Detailed steps for powering on the HMXAT200 System Controller and associated subracks.
Step-by-step guide to installing the SETMAX for Windows editor software from CD-ROM.
Procedure for editing and loading system configuration files using the SETMAX editor.
Procedures for saving and loading system configuration changes to and from a floppy disk.
To Next Page
