Unpacking the Unit
1. Make sure the shipping box is topside up before opening.
2. Remove the accessories box and check the box’s content
for the following items.
Product Manuals
Power Supply
Communication Cables
Remote Scale Display (Optional)
3. Carefully remove the platter and store it in a safe location
until the unit is properly installed into the checkout counter.
Figure 11
4. Lift the MS2420 scanner out of the box by carefully
grasping both sides near the center of the unit and lifting
directly up. Refer to Figure 12 for hand placement.
Important! Do not remove the MS2420 scanner from the
box by grabbing the shipping foam. This can
result in the unit falling!
Figure 12
5. Carefully remove the shipping foam from around the
MS2420 scanner.
Figure 13
15
To Next Page
Loading...
