Beeper Options and Button Functions
Changing the Beeper Tone
Beeper tones may be configured incrementally using the following bar code. The new tone will be heard
followed by a short pause. Two more new tones will be heard signifying the new setting has been stored in
memory. The silent (no beep) tone is also selectable.
³999975
Next Beep Tone
Changing the Beeper Volume
Volume levels may be configured using the volume button or incrementally using the following bar code. The
new volume will be heard followed by a short pause. Two more tones will be heard signifying the new setting
has been saved in memory. The silent (no volume) tone is also selectable.
³999974
Next Volume
40
To Next Page
Loading...
