The Multi-Function Button
Figure 29. The Multi-Function Button
Changing the Beeper Volume
A short (<3 second) dep
ression and the beeper volume will change. The
new volume will be heard. The silent (no beep) volume is also selectable.
Figure 30. Changing the
Beeper Volume
Placing the Unit in Laser & Motor Off Power Save Mode
Long (>3 se
conds) depression
The Laser & Motor Off Power Save Mode is the only power save mode
that can be activated with the multi-function button.*
Figure 31. Laser & Motor Off
Power Save Move
* This feature is configuration dependent. Refer to the MetroSelect
Configuration Guide (PN 00-02407x) under Scanner Operation: Power
Save Modes to enable this feature.
Waking the Unit from
All Power Save Modes
The next button depression will awaken the scanner for normal operation.
Figure 32. Normal Operation
41
To Next Page
Loading...
