Honeywell ms2420 - Changing the Wake Area Sensitivity Level

Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by
scanning one of the Photocell Sensitivity adjustment bar codes below.
*Max Photocell
Sensitivity
This feature
enables the MS24xx to be at max
sensitivity or far sensing for the wake up photo
transistor.
* This is the default setting.
³221200
Medium Photocell
Sensitivity
This feature
enables the MS24xx to be at a
medium 1 sensitivity or medium sensing for
the wake up photo transistor.
³221210
Low Photocell
Sensitivity
³221220
This feature
enables the MS24xx to be at a
low sensitivity or low sensing for the wake up
photo transistor.
Min Photocell
Sensitivity
³221230
This feature
enables the MS24xx to be at the
lowest sensitivity (close only) for the wake up
photo transistor.
* MS2400 Series Bar Code Scanner Default Setting
32