Honeywell MS2421 - Changing the Wake Area Sensitivity Level

Wake Activation Area Sensitivity (Photocell LED Output Range)
Changing the Wake Area Sensitivity Level (Photocell LED Range Adjust)
The MS2400 Series bar code scanner wake area sensitivity level can be set to the end users preference by
scanning one of the Photocell Sensitivity adjustment bar codes below.
*Max Photocell
Sensitivity
³221200
This feature enables the MS24xx to
be at Max sensitivity or far sensing
for the wake up photo transistor.
* This is the default setting.
Medium Photocell
Sensitivity
³221210
This feature enables the MS24xx to
be at a medium 1 sensitivity or
medium sensing for the wake up
photo transistor.
Low Photocell
Sensitivity
³221220
This feature
enables the MS24xx to
be at a low sensitivity or low sensing
for the wake up photo transistor.
Minimum Photocell
Sensitivity
³221230
This feature
enables the MS24xx to
be at the lowest sensitivity (close
only) for the wake up photo
transistor.
* MS2400 Series Bar Code Scanner Default Setting
34