In order to maximize rechargeable battery life and performance: Fully charge the battery. Then
use up to extend the battery performance because of charge cycle time
Running the instrument while charging is not recommended because it will shorten the battery
life and reduce performance. Operating the instrument while charging is forbidden in non-safe
areas.
If the instrument or battery pack is not used for long periods, we recommend charging every 4
months.
For sensor storage conditions, please refer to Technical Note TN-114.
Sensor Specifications, Cross-Sensitivities, And Calibration Information
For information on sensor specifications, cross-sensitivities, and calibration information, refer
to RAE Systems Technical Note TN-114: Sensor Specifications and Cross-Sensitivities
(available for free download from https://sps.honeywell.com/us/en/products/safety/gas-and-
flame-detection). All specifications presented in this Technical Note reflect the performance of
stand-alone sensors. Actual sensor characteristics may vary when the sensor is installed in
different instruments. As sensor performance may change over time, specifications provided
are for brand-new sensors.
Honeywell MultiRAE Series™ 6 User Manual
To Next Page
Loading...
Need help?
General
