Modifier Keys
The modifier keys are located at the bottom of the keypad. The modifier keys are the orange key and the blue key.
A modifier key pressed after itself toggles that modifier mode off.
A modifier keypress cancels the other modifier’s active state. Then the state of the modifier key that was pressed last
becomes active. For example, if the Orange modifier state is active (MX9 is currently in Orange mode), pressing the Blue key
cancels Orange mode and sets Blue mode active.
Once a modifier key is pressed, the modifier map state continues until another key is pressed.
The Orange and Blue keys do not need to be held down while another key is pressed.
Modifier keys do not auto-repeat.
Expansion Slots
l Summit radio card
l SIM card
l SD card
The expansion slots in the MX9 are accessible via the hatch. The hatch can be opened using a standard size screwdriver.
When the hatch is opened, the MX9 automatically shuts down.
SD card configurations in 512MB, 1GB and 4GB are available from Honeywell.
Note: It is good practice to save your changes then perform an orderly shutdown to preserve RAM contents before opening
the hatch.
Power Key Functions
The Power key is located at the bottom of the keypad, next to the Scanner LED.
The Power On/Off key is a momentary contact.
Behavior is as follows:
When the MX9 is in ... Pressing the Power key ...
Off mode boots the unit and sets it to the On mode
On mode sets the unit in Suspend mode
Suspend mode sets the unit in On mode
Critical Suspend mode has no effect
Backlight off mode sets the unit in Suspend mode
Display off mode sets the unit in Suspend mode
2-6
To Next Page
Loading...
