Honeywell MX9 - Start Menu Program Options; Activesync; Communication; Connect and Lxeconnect

Start Menu Program Options
The following list represents the factory default program installation. Your system may contain different items from those
shown below, based on the software and hardware options purchased.
Communication Stores Network communication options
ActiveSync Transfer files between a MX9 and a desktop computer
Connect Run this command after setting up a connection
Start (or Stop) FTP
Server
Begin / end connection to FTP server
Command Prompt The command line interface in a separate window
eXpress Scan Option. Requires Wavelink Avalanche option eXpress Config.
Internet Explorer Access web pages on the world wide Internet
Microsoft WordPad Opens an ASCII notepad
Remote Desktop Connection Log on to a Windows Terminal Server
RFTerm Option. Terminal emulation application.
Settings
Access to all Control Panels, a shortcut to the Network and Dialup Control Panel and
access to Taskbar options.
Summit Set Summit radio / network parameters
Transcriber Enter data using the stylus on the touch screen
Wavelink Avalanche Option. Remote management for networked devices
Windows Explorer File management program
l If installed, RFTerm runs automatically at the conclusion of each reboot.
l If installed and enabled, AppLock runs automatically at the conclusion of each reboot.
l The wireless client connects automatically during each reboot.
l Bluetooth re-connects to nearby paired devices automatically at the conclusion of each reboot.
Communication
Start > Programs > Communication
ActiveSync
ActiveSync is pre-loaded on all mobile devices.
Using Microsoft ActiveSync you can copy files from your MX9 to your desktop computer , and vice versa.
Once an ActiveSync relationship (partnership) has been established with Connect (on a desktop computer), ActiveSync will
synchronize using the wireless link, serial port, or USB on the MX9.
Connect and LXEConnect
Upon cabling your MX9 to the desktop/laptop, and ActiveSync on the desktop/laptop opens, if the Connect or LXEConnect
installation does not open on your MX9, contact Technical Assistance.
4-13