RFTerm (Optional)
Start > Programs > RFTerm
RFTerm is pre-loaded when ordered. The application can also be accessed by double clicking the RFTerm desktop icon.
Avalanche
The Wavelink Avalanche Enabler installation file is loaded on the MX9 by Honeywell; however, the device is not configured to
launch the installation file automatically. The installation application must be run manually the first time Avalanche is used.
Following installation, the Wavelink Avalanche Enabler will be an auto-launch application. This behavior can be modified by
accessing the Avalanche Update Settings panel through the Enabler Interface.
Software Development
The CE API Programming Guide documents unique API calls for the MX9. It is intended as an addition to Microsoft Windows
CE API documentation.
A Software Developers Kit (SDK) and additional information about software development can be found the Developer Portal.
Contact Technical Assistance for more information.
Access Files on the SD/CF Card
Click the My Device icon on the Desktop then click the System icon.
A SD/CF card is used for permanent storage of the MX9 drivers, CAB files and utilities. It is also used for registry content back
up.
CAB files, when executed, are not deleted.
Note: Always perform a warm reset (Start / Run / Warmboot) when exchanging one card for another.
4-5
To Next Page
Loading...
