Wake Up Event Default Settings
Enabled Disabled
Power key Bluetooth connection
Touch screen tap COMM CTS
Integrated keypad key press Internal serial port device IRQ
USB client connection Push to talk on audio headset
External power applied Detection of external microphone
Real-time clock
Trigger handle trigger press
Events that do NOT wake up from Suspend - these events are not available to be configured to wake the unit up from suspend
l External keyboard/mouse
l Ethernet (data or connection)
l USB Host (data or connection)
l USB client disconnection
l Serial data
l Internal Serial port handshaking (WAN, etc)
l 802.11 radio
l Docked signal (i.e., a non-powered cradle would not wake the MX9 up, but a powered cradle could be a wake up event if
External Power is set to be a wake up event)
l MPF (Main Power Failure)
l Audio data
l Display data
Critical Suspend
The purpose of the Critical Suspend mode is to maintain data stored in RAM with minimum power consumption. If the Main
Battery is removed, the Backup Battery is supplying power to the MX9 during Critical Suspend Mode. If Main Battery power is
re-applied, the device will transition to Suspend mode. If Main Battery power is not made available before the Backup Battery is
depleted, the unit enters Off Mode.
Off
The MX9 enters the Off Mode when the Main Battery and the Backup Battery are depleted or when Shutdown is selected from
the Start menu.
3-4
To Next Page
Loading...
