Option Explanation
Launch
Button
See following section titled Launch Button.
Note: AppLock Administrator Control panel file Launch option does not inter-relate with similarly-named options
contained in other Control Panels.
Global
Key
Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when switching between
applications. The Global Key default key sequence must be defined by the AppLock Administrator. The Global key
is presented to the end-user as the Activation key.
Global
Delay
Default is 10 seconds. Enter the number of seconds that Applications must wait before starting to run after reboot.
Note: Delay (Global) may not be available in all versions of AppLock. You can simulate a Global Delay function
by setting a delay for the first application (lowest Order) launched and setting the delay to 0 for all other
applications. See Boot Options.
Input
Panel
Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu. When enabled the input
panel cannot be enabled or disabled for each individual application, and is available to the user for all configured
applications.
Clear
Button
Tap the Clear button to clear all currently displayed Filename or Application information. The Global settings are not
cleared.
Scroll
Buttons
Use the left and right scroll buttons to move from application setup screen to application setup screen. The left and
right buttons update the information on the screen with the previous or next configured application respectively.
4-34
To Next Page
Loading...
