Honeywell NetAXS NX4S1 - Ethernet TCP;IP Communications; Figure 11: RS-485 Configuration Via Netaxs Gateway; Figure 12: Ethernet TCP;IP Configuration

NetAXS™ NX4S1 Installation
Installation
NetAXS Access Control Unit NX4S1 Installation Guide, Document 800-00008, Revision A 19
Figure 11: RS-485 Configuration via NetAXS™ Gateway
Ethernet TCP/IP Communications
Figure 12: Ethernet TCP/IP Configuration
Each NetAXS™ panel has a port for an Ethernet TCP/IP interface (see Figure 12, Ethernet TCP/IP
Configuration). The Ethernet TCP/IP interface provides 10/100 Mbit Ethernet support for each panel.
Up to 31 panels can be configured on each TCP/IP connection.
NetAXS
NetAXS
Gateway
NS2+
Reader 1
Reader 4
Reader 1
Reader 4
Reader 1
Reader 4
Reader 2
Reader 1
COM1
NetAXS
RS-485 Multidrop Line
A combination of NetAXS and NS2+ panels, supporting a total of 31
panels per multi-drop line
Terminal
NetAXS
NetAXS
Gateway
NS2+
Reader 1
Reader 4
Reader 1
Reader 4
Reader 1
Reader 4
Reader 2
Reader 1
NetAXS
RS-485 Multidrop Line
A combination of NetAXS and NS2+ panels, supporting a total of 31
panels per multi-drop line
Ethernet
Up to 255 TCP/IP Connections per System
Network Interface
Card Inside PC
Ethernet
10/100
Terminal