Honeywell NOTIFIER AM-8200 - Pre-Alarm Condition

PAGE - 8 Programming Manual AM_8200
NOTIFIER ITALIA Doc. M-162.1-AM8200-ENG Rev A2 AM8200_manu-prog-ENG
 Pre-alarm condition
The following screen appears when the control panel is in the zone pre-alarm condition
Use the arrow keys to scroll through the list of pre-alarm zones. By pressing the Enter key you will
access the list of points in the pre-alarm of the selected zone, with the arrow keys you can scroll through
the list of alarm devices
Any subsequent
zones in pre-alarm
Zone Counter in Pre-Alarm
Pre-alarm device
Text programmed for the
device
Zone View Window
 First zone in pre-alarm
 • time, date, progressive event
 • programmed text for the zone