AM_8200 Programming Manual PAGE - 33
AM82000_manu-prog-ENG Doc. M-162.1-AM8200-ENG Rev A2 NOTIFIER ITALIA
Auto-learn (automatic detection of installed devices)
:
:
From the Points menu, by selecting the “Auto-Learn” item and confirming the selection through the enter key
you enter the self-programming procedure of the devices installed on the line.
erify Double Address: YES
By selecting YES, panel will check for more
than one device programmed with same
address in a line.
When several devices programmed with the same
address are found, the message shown in the
figure is displayed with the indication of the
address. The user will be able to identify the
devices with the same address through the
activation of the relevant leds.
To Next Page
Loading...
