Honeywell NOTIFIER AM-8200 - Alarm Condition

AM_8200 Programming Manual PAGE - 9
AM82000_manu-prog-ENG Doc. M-162.1-AM8200-ENG Rev A2 NOTIFIER ITALIA

Alarm Condition
The following display appears when the control unit is in condition of zone alarm.
Through the arrow keys you can scroll the list of the zones containing Faults.
By pressing the enter key
you can access the list of point in alarm of the zone selected on the display,
through the arrow keys you can scroll the list of the devices in alarm.
Counter for zones
in alarm
FIRST ZONE IN ALARM
 Date and Time +
Event Number ID
 Text for the Zone
Device in Alarm
D = Detector
M = Module
Text programmed
For this Device
If more zones are in Alarm :
2 ZONES IN ALARM
LAST ZONE IN ALARM
 Date and Time +
Event Number ID