Honeywell NOTIFIER AM-8200 - SDEL; TIM

PAGE - 68 Programming Manual AM_8200
NOTIFIER ITALIA Doc. M-162.1-AM8200-ENG Rev A2 AM8200_manu-prog-ENG
 If the DEL equation duration time is not specified, the equation will be active until the reset of the
elements in the equation.
 The maximum value of the duration time is 10 minutes
 The maximum values of the delay time is 10 minutes.
SDEL
The “SEDEL” operator is equal to the “DEL” operator, with the difference that, if during the delay time the
equation is not true any longer, the timer continues to count and then it activates the output device.
To re-set this timer perform an alarm or Fault reset.
TIM
is the operator that allows to program output activations at periodic time intervals.
There can be two formats :
FORMAT Type 1 : TIM (SU MO TU WE TR FR SA 00.MM 00.MM)
Where : 00 = hours, MM = minutes
This format allows to perform programmings weekly, for specific days of the week
FORMAT Type 2 : TIM (MM GG AA OO.MM OO.MM)
Where : MM = month, GG = day, AA =year
This format allows to perform programmings yearly
Example: IF the G90 software group equation is : TIM (SA SU 07.30 13.59)
THEN the G90 group will be active on Saturday and Sunday from 07.30 a.m. to 13.59.
N.B.:
 If the day, month or year is not specified, the value assumes the meaning of “All days”.
To not specify anything enter two signs “  “ refer to the following example:
TIM (   07.30 13.59)
 The start time and end time values, use the 24 hour format (midnight = 00.00 ... 23.59)
 The value “00.MM” of end time MUST be higher than the value of the start time.
 The maximum value for start time and end time is 23:59
activation days
(optional)
start time end time
Enter a
s
p
ace characte
r
Enter a
s
p
ace characte
r
Activation date
(optional)
start time end time
Enter a space
character
Enter a space
characte
r