LCD-160 Manual — P/N 51850:D2 10/07/2016 33
Programming Screens Screen Displays
Figure 9.5 LCD Display Screen
Soft Keys
BRIGHTER - Press this key to increase the display intensity by 4%.
DARKER - Press this key to decrease the display intensity by 4%.
BACKLIGHT - Pressing this key toggle the status of the backlight between ON, OFF, and
ON EXCEPT AC FAIL.
DEFAULT - Press this key to revert all screen preferences to their factory settings.
ACCEPT - Press this key to accept your changes. A confirmation screen will display before your
new settings are saved.
BACK - Press this key to return to the previous screen without accepting information entered.
LCD DISPLAY
LCD INTENSITY: 40%
BRIGHTER DEFAULT
DARKER ACCEPT
BACKLIGHT:ONEXCEPT AC FAIL BACK
NOTE: ON EXCEPT AC FAIL refers to a failure at the panel’s main power supply.
NOTE: During a LAMP TEST, the backlight will not turn on if it is programmed to OFF.
To Next Page
Loading...
Need help?
General