LCD-160 Manual — P/N 51850:D2 10/07/2016 35
Operating Screens Screen Displays
Figure 9.7 Events Count Display Screen (with Acknowledged Event)
Figure 9.8 Event Counts Display (with Unacknowledged Fire Alarm)
Soft Keys
ACKNOWLEDGE - Press this key to acknowledge an event. The command will read
ACKNOWLEDGE FIRE ALARM if the event is a fire alarm. It will read ACKNOWLEDGE if the
event is any other type. The command will not display if there are no events to acknowledge.
MORE INFORMATION - Press this key to view additional device or event information on the
“More Information” screen.
PROGRAM - Press this key to go to the “Panel Program Menu.” This option will not be visible if
any unacknowledged fire alarms exist or if the programming switch is not enabled. See “Setting the
Programming Switch” on page 31.
SIGNAL SILENCE - Press this key to silence all panel outputs programmed as silenceable.
SYSTEM RESET - Press this key to send a reset command to the panel and to clear the LCD-160
database of all off-normal events. If both Fire and MNS conditions are present on the panel, a
second System Reset is needed to clear the alarms from the panel.
MENU - Press this key to return to the “Main Menu.” This option will not be visible if an
unacknowledged event exists.
ACKNOWLEDGED TROUBLE NO ANSWER
ELEVATOR LOBBY EAST WING
FIFTH FLOOR Z005 SMOKE(PHOTO)
11:57:45A TUE JAN 12, 2016 N112L03D052
EVENT COUNTS
FIRE ALARMS:000 PREALARM:000 TROUBLE:001
SUPERVISORY:000 SECURITY:001 DISABLE:000
12:06:32P TUE JAN 12, 2016
SIGNAL SILENCE
MORE INFORMATION SYSTEM RESET
PROGRAM MENU
FIRE ALARM
ELEVATOR LOBBY EAST WING
FIFTH FLOOR Z005 SMOKE(PHOTO)
11:57:45A TUE JAN 12, 2016 N112L03D052
EVENT COUNTS
FIRE ALARMS:001 PREALARM:000 TROUBLE:001
SUPERVISORY:000 SECURITY:000 DISABLE:000
12:06:32P TUE JAN 12, 2016
ACKNOWLEDGE FIRE ALARM SIGNAL SILENCE
MORE INFORMATION SYSTEM RESET
To Next Page
Loading...
