RP-2001 Series Manual — P/N 52985:D5 1/26/2017 75
Maintenance Programming Level Programming
A flashing cursor will appear on the left side of the display. Enter the two digit month, two digit day
and four digit year. The cursor will move one position to the right after each entry. When the fourth
digit of the year has been entered, the display will return to the Time and Date Screen which will
show the new date.
To change between 12 hour and 24 hour format, press 3 for Clock Format while viewing the Time
and Date screen. Each press of the 3 key will toggle the display between 12 HR and 24 HR format.
To Next Page
Loading...
