44 User Guide for ScanPal EDA60K-0 Handheld Computer
Scanning barcodes
Scan engine will emit scanning beams for accurate barcode aiming. It
will also support a full range of 360° scanning, which will make barcode
scanning more convenient.
Note: Before scanning a barcode, you only need to enable the desired
barcode symbology in the settings.
1. Tap Applications >Demos>ScanDemo.
2. Align the scanning window with the barcode and stably place the
Handheld Computer a few inches away from the barcode.
3. Press one of the scan keys or tap Scan on the interface. Make sure
the entire barcode is within the scanning beam range.
When the scanning is successfully completed, you will hear a „beep‟
sound, and the Good Read LED will open immediately.
To Next Page
Loading...
