User Guide for ScanPal EDA60K-0 Handheld Computer
Network communication
Users can connect the Handheld Computer to wireless and wired
networks. Users can get the Handheld Computer connected via the
following ways:
• 802.11 radios
• Bluetooth
• USB
Connecting to Wi-Fi networks
When communicating through wireless networks, ScanPal EDA60K-0
transfer data through 802.11 radios. Before connecting to a Wi-Fi
network, users need to know the Security Protocol of the network and
the certificates it required. Usually, 802.11 radio is diabled by default.
1. Enter Settings, slide the WLAN switch to enable it.
2. When the WLAN switch turns blue, tapping the WLAN bar will
display the detected network list.
To Next Page
Loading...
Need help?
General