User Guide for ScanPal EDA60K-0 Handheld Computer
3. Tap Power Off.
4. Tap OK when message „EDA60K-0 will shut down‟ pops up.
5. Press down „Power Key‟ to restart EDA60K-0.
Restart factory settings
If the Handheld Computer appears to be locked, try to cold boot. If
resetting is invalid, try to restore factory settings, restart the Handheld
Computer to make it work again and do troubleshooting later.
Warning: This action will clear all data in the Handheld Computer,
including all applications and data, but excluding data stored in flash
memory or external storage device.
1. Tap All Applications > Settings.
2. Tap Backup & Reset.
3. Tap Restore Factory Settings.
4. Tap Reset the Phone.
5. EDA60K-0 will restart and automatically clear user data.
To Next Page
Loading...
