Honeywell SILENT KNIGHT 6700 - 3: Current Draw Worksheet for SD SLC Devices

20 6700 Manual — P/N LS10148-001SK-E:F 8/29/2022
Prerequisites for Installation Calculating Current Draw and Standby Battery
3.5.3 Current Draw Worksheet for SD SLC Devices
Use Table 3.3 Table 3.3 to determine current requirements during the alarm/battery standby operation when the SD SLC devices are
installed. You can install up to 75 SD devices per panel.
Device # of Devices Current per Device
Standby
Current
Alarm Current
For each device, use this formula: This column X This column = Current per number of devices.
Fire Panel
(Current draw from battery)
1 Standby 165 mA 165 mA
Alarm: 310 mA 310 mA
1
SD500-AIM
Standby/Alarm: 0.55 mA
2
mA mA
SD500-MIM mA mA
SD500-PS mA mA
SD500-ARM mA mA
SD505-HEAT mA mA
SD505-PHOTO mA mA
SD500-ANM Aux. Pwr Standby: 8 mA mA
Alarm: 60 mA mA
SLC Standby/Alarm: 0.55 mA mA mA
SD500-SDM SLC Standby/Alarm: 0.55 mA mA mA
Aux. Pwr Standby: 20 mA mA
Alarm: 106 mA mA
SLC Accessory Base
SD505-6RB Standby/Alarm: 0.082 mA mA mA
SD505-6SB Aux. Pwr Standby: 1 mA mA
Alarm: 32 mA mA
SLC Standby/Alarm: 0.082 mA mA mA
SD505-DUCTR Aux. Pwr Standby: 20 mA
3
mA
Alarm: 62 mA
3
mA
SLC Standby/Alarm: 0.5 mA mA mA
SD505-DTS-K None, included with SD505-DUCTR worst case.
SD505-DUCT SLC Standby/Alarm 0.5 mA mA mA
SLC Isolator Devices
SD505-LIM Standby/Alarm 0.092 mA mA mA
SD505-6IB
Accessories Modules
4
5815XL SLC Expander Standby/Alarm: 55 mA mA mA
6860 Remote LCD Annunciator Standby: 35 mA mA
Alarm: 53 mA mA
5860 Remote LCD Annunciator Standby: 58 mA mA
Alarm: 68 mA mA
6855 Remote LCD Annunciator Standby: 59 mA mA
Alarm: 92 mA mA
5824 Serial/Parallel Module Standby/Alarm: 45 mA mA mA
5496 NAC Expander Standby/Alarm (SBUS): 10 mA mA mA
5895XL Power Supply Standby/Alarm (SBUS): 10 mA mA mA
5865-4 LED Annunciator
(with reset and silence switches)
Standby: 35 mA mA
Alarm: 145 mA mA
Table 3.3 Current Calculation Worksheet for SD Devices