Honeywell STT850 Series - Device Health; Device Icon; Honeywell Logo; Process Variables; Shortcuts

Page 100 STT850 Series HART/DE Option User’s Manual Revision 4.0
10.5.1 Device Health:
Shows Overall Device Status Image and “Device Status” Button/Link that takes you to the Device
Status screen.
Overall Device Status will be either Normal, Warning or Failure depending upon the health of the
device:
Overall Device Status will be shown on each of the DTM pages so that the user can get
the current status of the device from any screen
10.5.2 Device Icon / Honeywell Logo:
Shows the Honeywell Logo, Transmitter icon.
10.5.3 Process Variables:
Shows PV, SV, TV, QV, % Range and Loop Current.
10.5.4 Shortcuts:
Device Setup:
 Provides Tabs to access any of the functions : Basic Setup, Calibration, Process Variables,
Diagnostics, Device Status, Services, Detailed Setup, Sensors, Alarm, Display setup, Review
Basic Setup:
 Provides Device Setup information (Tag, Device Type, MB Type etc.)
Calibration:
 Provides access to all the Calibration functions
Refer to the Table 11 for more details